Module Title:Model Detailing
Language of Instruction:English
Credits: 5
NFQ Level:6
Module Delivered In 2 programme(s)
Teaching & Learning Strategies: The learner is immersed in a range of collaborative, problem-solving activities, to investigate and evaluate design solutions. The holistic, student-centred studio-based approach, facilitated by faculty, is intended to negotiate, facilitate and guide learner engagement and scaffold a deep-learning using the following strategies: • Lectures, • Studio based learning, • Peer-to-peer group/team learning, • E-Learning, • Workshop, • Facilitated peer-to-peer critique/review, • Self-directed independent learning,
Module Aim: The aim of this module is to introduce learners to detailing in model making for design. This module builds on the skills learned in workshop practice and ergonomics & model making. The aim of the module is to introduce new methods of modelling to increase detail and functionality. Learners will engage with opportunities, materials & safe practice of laser cutting and deliver a model using this method. Through this they will build on their iterative skills of modelling and explore opportunities to use models as a decision making tool. Learners through applied ergonomic test models to synthesise with the design process, ergonomics and model making. Learners will also be able to source components, fixtures, mechanisms and materials that will enhance the detailing on their model.
Learning Outcomes
On successful completion of this module the learner should be able to:
LO1 To apply relevant detailing to model making both for ergonomic testing models and final appearence models
LO2 To create design models suitable to testing and applying to a design project
LO3 To engage with laser cutting as a method of model making and demonstrate its application in a finished model
LO4 To plan modelling and source components specific to model detailling
LO5 To produce a detailed representational model demonstrating the use of new skills
LO6 To identify the synthesis between model making, ergonmoic and the design process
LO7 Engage in a review process of module content and deliverable and reflect on future development
Pre-requisite learning
Module Recommendations

This is prior learning (or a practical skill) that is recommended before enrolment in this module.

No recommendations listed
Incompatible Modules
These are modules which have learning outcomes that are too similar to the learning outcomes of this module.
No incompatible modules listed
Co-requisite Modules
6850 DSGN H2429 Design
Requirements
This is prior learning (or a practical skill) that is mandatory before enrolment in this module is allowed.
No requirements listed
 

Module Content & Assessment

Indicative Content
Laser Cutting
Learners will be introduced to laser cutting as a tool to aid in the development of 3D modelling for design. Through lectures and practice based learning they will be walked through the good practice, running and maintenance of the laser cutter. Learners will be made aware of appropriate material use for the machine. Learners will engage in a small project to allow them run through the process and deliver a product at the conclusion.
Iterative Modelling for Form Generation
Through synthesis the design module learners will explore form and aesthetic through iterative modelling. This will build on previous foam modelling projects where finer details are explored and assessed.
Applied Ergonomics Modelling
In groups learners will plan, produce and assess ergonomic models generated to answer questions in the design module. The model type will be governed by the focus of the design module
Industry Driven Representational Model
Learners will develop the skills and knowledge to source and acquire component parts that will increase the detail of final models. Learners will build on previous representational model and increase the focus on the detailing to lift the model to a professional standard. This model will be presented to a client (in line with design module) in a way that engages the client in the design on a 3D level.
Workshop/Materials (Resource)
This is a dedicated space to allow learners to test, evaluate and represent the application of their research through 3D physical workshop made models. Resourcing of a workshop space include machinery, tools and materials. Materials such as modelling foam, MDF, Jelutong, Cardboard, foam board are all essential to investigation of developing a design solution.
Technician (Resource)
A dedicated design technician to support, demonstrate and maintain equipment while auditing and stocking of materials for the design workshop and studio practice
Laser Cutter (Resources)
A laser cutter for cutting acrylic, paper, card, wood & engraving of anodised alluminium.
Assessment Breakdown%
Continuous Assessment100.00%
Continuous Assessment
Assessment Type Assessment Description Outcome addressed % of total Assessment Date
Project Laser Cutting – production of a model using the laser cutter as the primary production method. The project will be a specific task driven project 3,5,6 20.00 Week 4
Project Iterative Modelling – exploration of form and aesthetic through iterative foam modelling and application to design solutions. 1,2,6 10.00 Week 6
Project Applied Ergonomics Modelling – group planning, production and evaluation of ergonomic models 1,2,6 10.00 Week 9
Project Industry Focused Appearance Model – Production of final appearance model in line with industry driven design project. Detailing, components, finish & presentation. 1,4,5,6 30.00 Week 15
Portfolio Learners will deliver a presentation showing content and development over the year across the six key learning streams and the placement/Erasmus 1,2,3,4,5,6,7 20.00 Week 30
Oral Examination/Interview Learners will present for interview and review performance across the six key learning streams including a future development plan 7 10.00 Week 30
No Project
No Practical
No End of Module Formal Examination

ITCarlow reserves the right to alter the nature and timings of assessment

 

Module Workload

Workload: Full Time
Workload Type Frequency Average Weekly Learner Workload
Studio Based Learning Every Week 4.00
Independent Learning Time Every Week 2.00
Total Hours 6.00
 

Module Delivered In

Programme Code Programme Semester Delivery
CW_DHPDI_B Bachelor of Arts (Honours) in Product Design Innovation 2 Mandatory
CW_DHIDE_D Bachelor of Arts in Industrial Design 2 Mandatory