The aims of the module are:
(1) to develop an understanding of structural theory and analysis;
(2) to develop a knowledge of the elastic design of timber and steel beams.
(3) to develop a knowledge of the design and detailing of structural elements in reinforced concrete.
Learning Outcomes
On successful completion of this module the learner should be able to:
LO1
to draw a shear force and bending moment diagram for statically determinate members.
LO2
to calculate the section properties for symmetrical and non-symmetrical sections.
LO3
to calculate the elastic bending stresses and the deflection of simply supported timber and steel members.
LO4
to analyse a simple truss using the method of sections and method of joints.
LO5
to calculate the characteristic dead and imposed loads on structural members.
LO6
to design a simply supported reinforced concrete beam and slab in accordance with Eurocode 2.
Pre-requisite learning
Module Recommendations
This is prior learning (or a practical skill) that is recommended before enrolment in this module.
No recommendations listed
Incompatible Modules
These are modules which have learning outcomes that are too similar to the learning outcomes of this module.
No incompatible modules listed
Co-requisite Modules
No Co-requisite modules listed
Requirements
This is prior learning (or a practical skill) that is mandatory before enrolment in this module is allowed.
No requirements listed
Module Content & Assessment
Indicative Content
Theory of Structures
(a) Section properties:- area, second moment of area, elastic modulus and radius of gyration
(b) Shear force and bending moment diagrams
(c) Theory of simple bending
(d) Tension and compression members
(e) Effective length and slenderness ratio.
(f) Axial capacity of compressive members.
(g) Analysis of pinned jointed frames
Design of Structural Elements
a. Load on structural elements
b. Design methods: permissible stress and limit state
c. Elastic bending stress
d. Shear stress
e. Deflection
f. Analysis of a reinforced concrete section.
g. Cover to reinforcement
h. Characteristic and ultimate loads
i. Design shear force and bending moment
j. Tension steel
k. Shear steel
l. Deflection
m. Design of reinforced concrete elements to the relevant National and European Standards.
Detailing of Structural Elements
a. Bond and Anchorage
b. Lap lengths
c. Curtailment
d. Reinforcement scheduling
e. Weight of reinforcement
Assessment Breakdown
%
Continuous Assessment
20.00%
Project
20.00%
End of Module Formal Examination
60.00%
Continuous Assessment
Assessment Type
Assessment Description
Outcome addressed
% of total
Assessment Date
Examination
Class Exam
1,2,3,4,5,6
20.00
n/a
Project
Assessment Type
Assessment Description
Outcome addressed
% of total
Assessment Date
Project
Design Projects
1,2,3,4,5,6
20.00
n/a
No Practical
End of Module Formal Examination
Assessment Type
Assessment Description
Outcome addressed
% of total
Assessment Date
Formal Exam
Final Exam
1,2,3,4,5,6
60.00
End-of-Semester
SETU Carlow Campus reserves the right to alter the nature and timings of assessment