Module Title:Process Measurements 2
Language of Instruction:English
Credits: 5
NFQ Level:7
Module Delivered In 1 programme(s)
Teaching & Learning Strategies: The module will be delivered using lectures and practical sessions. The lectures will incorporate a mixture of presentations, example and student exercises/problem-solving, question and answer sessions, group discussions and online resources. Use will be made of “hands-on” laboratory programmes to promote greater student engagement with the learning process by facilitating them to apply and implement the concepts explored in the classroom. Students will also work collaboratively from time to time in the completion of exercises and development of solutions.
Module Aim: The aim of this module is to provide students with an in-depth understanding of the design, operation and application of Flow Measurement, Smart Instrumentation, Weighing Systems and Explosive Atmospheres.
Learning Outcomes
On successful completion of this module the learner should be able to:
LO1 Demonstrate knowledge of the principles of operation for Flow Measurement, Smart Instrumentation, Weighing Systems and Explosive Atmospheres safety systems.
LO2 Determine appropriate safety precautions for working in explosive atmospheres.
LO3 Select and apply the appropriate type of instrument to suit specific process applications.
LO4 Implement correct configuration, calibration, adjustment and diagnostic procedures for a range of smart instruments including flow meters and weighing systems.
Pre-requisite learning
Module Recommendations

This is prior learning (or a practical skill) that is recommended before enrolment in this module.
No recommendations listed
Incompatible Modules
These are modules which have learning outcomes that are too similar to the learning outcomes of this module.
No incompatible modules listed
Co-requisite Modules
No Co-requisite modules listed
Requirements
This is prior learning (or a practical skill) that is mandatory before enrolment in this module is allowed.
No requirements listed
 

Module Content & Assessment

Indicative Content
Flow Measurement
Types of Flow Systems. Operation, construction, selection, application, installation and sources of errors for various types of Flow Meters. Calculating flow meter output for given process conditions along with calculating errors during calibration.
Strain gauges and weighing systems
Principles of operation for various types of strain gauges including stress, strain, young modulus of elasticity, including associated calculations for these terms. Determination of sensitive axis, non-sensitive axis, dummy gauge and active gauge, gauge factor, gauge resistance and sensitivity. Bridge measuring circuits; 1/4 bridge, 1/2 bridge, full bridge including output calculations from each type. Load cell types; 4 wire, 6 wire, effects of: overloading and shock loading. Calibration of Load Cells individually and collaboratively.
Microprocessor Based Instrumentation
HART Communication Protocol, frequency shift keying, Instrument configuration Types of memory, CPU, polling. • Types of memory, RAM/ROM, CPU, address bus, data bus, control bus, arithmetic logic unit.
Hazardous Environments
Main types of hazards and their classifications associated with explosive atmospheres. Types of protection for equipment in explosive atmospheres. Use and operation of Zener barriers and current standard associated with hazardous areas.
Assessment Breakdown%
Continuous Assessment30.00%
Practical20.00%
End of Module Formal Examination50.00%
Continuous Assessment
Assessment Type Assessment Description Outcome addressed % of total Assessment Date
Case Studies Written assignment discussing measurement technologies covered in the module. 1,2,3 20.00 Week 13
Short Answer Questions Online/Classroom based test. 1,2,3 5.00 Week 5
Short Answer Questions Online/Classroom based test. 1,2,3 5.00 Week 10
No Project
Practical
Assessment Type Assessment Description Outcome addressed % of total Assessment Date
Practical/Skills Evaluation Configure, calibrate and discuss a weighing system. 1,3,4 10.00 n/a
Practical/Skills Evaluation Configure, interrogate and report on a smart flow meter. 1,3,4 10.00 n/a
End of Module Formal Examination
Assessment Type Assessment Description Outcome addressed % of total Assessment Date
Formal Exam Written Exam 1,3,4 50.00 End-of-Semester
Continuous Assessment
Assessment Type Assessment Description Outcome addressed % of total Assessment Date
Case Studies Written assignment discussing measurement technologies covered in the module. 1,2,3 20.00 Week 13
Short Answer Questions Online/Classroom based test. 1,2,3 5.00 Week 5
Short Answer Questions Online/Classroom based test. 1,2,3 5.00 Week 10
No Project
Practical
Assessment Type Assessment Description Outcome addressed % of total Assessment Date
Practical/Skills Evaluation Configure, calibrate and discuss a weighing system. 1,3,4 10.00 n/a
Practical/Skills Evaluation Configure, interrogate and report on a smart flow meter. 1,3,4 10.00 n/a
End of Module Formal Examination
Assessment Type Assessment Description Outcome addressed % of total Assessment Date
Formal Exam Written Exam 1,2,3,4 50.00 End-of-Semester

SETU Carlow Campus reserves the right to alter the nature and timings of assessment

 

Module Workload

Workload: Full Time
Workload Type Frequency Average Weekly Learner Workload
Lab/Lecture Every Week 3.00
Independent Learning Time Every Week 6.00
Total Hours 9.00
Workload: Part Time
Workload Type Frequency Average Weekly Learner Workload
Lab/Lecture Every Week 3.00
Independent Learning Time Every Week 6.00
Total Hours 9.00
 

Module Delivered In

Programme Code Programme Semester Delivery
CW_EMIMC_D Batchelor of Science in Industrial Measurement and Control 2 Mandatory